General Specifications - SAT 6.5
| Input Impedance |
40k Ohms balanced
|
| Common Mode Rejection Ratio |
40dB typical 60Hz
|
| Voltage Sensitivity |
200mV = 90dB SPL @ 1M
|
| Maximum Input Level |
+24dBu balanced
|
| Frequency Response |
+/- 1.5dB 200 to 10kHz
|
|
+/- 3.0dB 80 to 20kHz
|
| Low Frequency Cutoff |
80Hz
|
| Low Frequency Rolloff |
12dB per octave
|
| System Q |
0.707
|
| System Crossover Frequency |
1.5kHz
|
| System Crossover Slope |
4th order Linkwitz-Riley Acoustic
|
Enclosure
|
Solid 3/4" MDF construction with 1" front and rear baffle"
|
|
Viscoelastic energy absorbing front baffle coating
|
|
1/4"x 20 inserts for attachment of OmniMount type 100 brackets.
|
|
Dimensions are H305 x W203x D 260ｍｍ
|
|
Weight 12.2ｋｇ.
|
6 1/2" Hemispherical Woofer
|
Long excursion design with a cast aluminum frame
|
|
1 1/2" aluminum voice coil with vented motor for high power handling
|
|
Copper shorting ring for lower distortion.
|
|
Ultra-Low power compression
|
|
Mica filled polypropylene cone and rubber surround
|
|
Fully video shielded
|
1" Tweeter
|
Dual concentric diaphragm with integral wave guide
|
|
High power handling neodymium motor structure
|
|
Fully video shielded
|
|
Sub 1Khz primary resonance
|
Satellite Amplifier
|
Discrete symmetrical bipolar design with localized feedback
|
|
100-Watts RMS into 4-Ohms for the woofer
|
|
100-Watts RMS into 4-Ohms for the tweeter
|
|
THD + Noise less than 0.015% at rated output @1kHz
|
|
XLR balanced input
|
|
Adjustable gain control.
|
|
Computer optimized crossover
|
General Specifications - Sub 12
All subwoofer measurements are measured using the subwoofer direct input, which
does not have a low pass filter.
| Voltage Sensitivity |
90dB SPL @ 100mv @ 1M
(40 to 80Hz bandwidth limited pink noise) |
| Frequency Response |
(anechoic) 30 to 200Hz +/-3dB
|
| Typical In-Room Response |
20 to 200Hz (3000 Cubic Feet)
|
Bass Management Section
| Input Impedance |
20k Ohms balanced
|
| Common Mode Rejection Ratio |
40dB typical @60Hz
|
| Maximum Input Level (all inputs) |
+24dBu balanced
|
| Maximum Output Level |
+24dBu balanced
|
| Output Impedance |
200 Ohms balanced
|
| Auto Mute Time Out |
>15 Minutes
|
| Mute Threshold (all inputs) |
30mV
|
Left & Right Inputs to Sat Outputs
| Gain (balanced in and out) |
0dB
|
| High-Pass Filter |
type 2nd order Linkwitz-Riley
|
| High-Pass Filter Cutoff |
80Hz
|
| High-pass Filter Q |
0.707
|
| THD + Noise |
0.002% @ 1kHz @ +4dBu |
Left & Right Inputs to Sub Out
| Gain |
0dB
|
| Low-Pass Filter Type |
4th order Linkwitz-Riley
|
| Low-Pass Cutoff |
80Hz
|
Subwoofer Direct In to Direct Output
| Gain |
0dB
|
| Low-Pass Filter |
None
|
Enclosure
|
Solid 3/4" MDF construction with 1" MDF Front and Rear Baffle
|
|
Viscoelastic energy absorbing front baffle coating
|
Flush mounted driver
|
|
Isolation feet are included. Inserts for optional attachment of spike feet.
|
Dimensions are H457 x W406 x D508
|
|
Weight 28kg.
|
12" Woofer
|
Long excursion design with cast aluminum frame.
|
|
2" voice coil with vented motor for high power handling
|
|
Fully video shielded
|
Subwoofer Amplifier
|
Discrete symmetrical bipolar design with localized feedback
|
|
200-W RMS into 4 Ohms
|
|
THD + Noise less than 0.015% at rated power @100Hz
|
|
Adjustable gain control
|
 |
専用ウォールマウントブラケット
専用の壁面金具WHO100を使用して壁面へ安定設置することが可能です。
くわしく見る |
|
|
|
