セカンドスタッフ製品の登録トップページへ 制作部、音響設計、パラダイスレコード通信販売部へはこちらからセカンドスタッフ製品の展示販売店お問合せ総合窓口弊社会社概要・業務案内・採用情報などテクニカルサポート&ガイド、マニュアルなどのダウンロード、その他の技術情報製品情報のトップページへセカンドスタッフ取扱い製品の最新情報

Connections
XLR / TRS Combo Input
60k Ohms balanced Input gain = +0dBu
200k Ohms balanced Input gain = -12 dBu
RCA Input
30k Ohms unbalanced
3.5mm Input (front panel)
15k Ohms unbalanced
Common Mode Rejection Ratio
40 dB typical @ 60Hz (balanced inputs only)
Maximum Input Level
+18 dBu XLR / TRS/ RCA Input gain = +0dBu
+30 dBu XLR / TRS Input gain = -12dBu
+12 dBu 3.5mm / Mini-Jack (front panel input)
Voltage Sensitivity
200mV = 90 dB SPL @ 1m XLR/TRS (input gain = 0dBu)
200mV = 90 dB SPL @ 1m RCA
200mV = 96 dB SPL @ 1m 3.5mm (front panel input)
Note: 200mV = -11.75 dBu = -14 dBV



Amplification
Note: All power output measurements are made with the speaker
protection circuits disabled. Long term power output is limited by the
speaker protection circuitry.
Short term power output 1 channel driven
42 watts x 1 @ <.1% THD into 4 ohms @ 1 kHz
Short term power output 2 channels driven
35 watts x 2 @ <.1% THD into 4 ohms @ 1 kHz
Subwoofer power output
90 watts x 1 @ <1% THD into 4 ohms @ 50 HZ
3.5mm headphone output
4 mW x 2 @ <.2% THD into 16 ohms @ 1 kHz
Mains voltages
115V / 60Hz (North American Version)
230V / 50Hz (Export)
Voltage is set at the factory
Maximum power consumption: 240 watts
Fuse Type and Rating:
115V = 5 x 20mm, T 2 Amp 250V (Time Delay)
230V = 5 x 20mm, T 1 Amp 250V (Time Delay)



Satellite
3" cast frame midrange driver, hemispherical anodized aluminium cone,
Neodymium motor structure
1" fabric Neodymium tweeter
Fully video shielded
Low frequency crossover 140 Hz / Tweeter Crossover Frequency 2200 Hz
Nominal SAT impedance 4 Ohms
Frequency Response
+/- 2.0dB 200 Hz to 10 kHz, +/- 3.0dB 140 Hz to 20 kHz
The single 1/4" X 20 insert on the back of the EXO SAT is compatible
with BT Technologies BT-33 Brackets and OmniMount type 10 Series
wall / ceiling brackets.
Dimensions: 8" H X 5” D x 5” W (20.3cm X 12.7cm x 12.7cm)
Weight: 3 lbs / 1.36 kg



Subwoofer
8" woofer, vented motor, paper cone with foam surround
Fully video shielded
Isolation feet are included. Inserts for optional attachment of spiked feet
Dimensions: 12" H x 12" W x 13" D (30.5cm x 30.5cm x 33cm)
Dimensions (with feet): 13.8" H x 12" W x 13" D (33cm x 30.5cm x 33cm)
Weight: 25 lbs / 11.4kg
Frequency Response (anechoic): 35 to 140Hz +/-6dB
Typical In-Room Response: 20 to 200Hz (1500 Cubic Feet)
Connecting multiple sources
iPod is a registered trademark of Apple Computer, Inc.


英文スペックシートPDFはこちらからダウンロード可能です。